The device is consisted of solar controller and inverter, manufactured with top quality imported components, designed based on DPS technology and with the advantages of high reliability, efficiency and fully functional performance.
This device converts DC power into 220V (120V), 50Hz/60Hz AC power, and provides electricity to the loads, such as TV, satellite receiver, household appliances etc. It can be also acting as supporting power for solar & wind power system.
l Wall-mounted, convenient for installation
l Maximum power point tracking(MPPT) charging mode, maximize the utilization of solar power, with the peak efficiency up to 99.9%
l Configure inverter output for two utility settings,(1)110V/60Hz, (2)220V/50Hz
l Integrated design with controller, inverter and isolated technique
l Built-in AC charger option, allows to connect a generator or mains up to the off grid system and automatically charge up batteries when the solar power is getting too low.
l Pure sine wave output, support unbalanced load
l Isolated transformer, safe and stable, 92% system efficiency
l Intelligent battery management and temperature compensation function
l City power/diesel generator input interface (optional)
l Low self-consumption, energy conservation
l LCD display + LED status indicator, allow user to monitor the operating mode or status
l Certifications: CE, FCC (we can help customers with other approvals)
l Warranty: 2 years, can be extended to 3-10 years
1. Battery over-discharge Protection: When the battery voltage is lower than the limit of 20V(When SW1=1, is 21 Vdc), or higher than the limit of 32VDC, the buzzer will alarm, and “Alarm” indicator turns on, the output will stop; When the battery voltage returns to normal range, the alarm warning will automatically stop and the output resume.
2. Over-temperature Protection: When the temperature of the internal key components is higher than 90 ℃, the buzzer will alarm and “ Over Temp” indicator turns on, and the output will stop; when the ambient temperature or internal temperature of the device drops to normal level, and battery voltage is higher than the recovery points, the output will automatically resume.
3. Overload Protection: When the external load is larger than the maximum rated load capacity 2000W,the buzzer will alarm and “Over Load” indicator turns on; when the external load is adjusted to the normal working range, the device will automatically resume in 1 minute; if two over-load problems occur in quick succession, it need to restart the device.
4. Load Short-circuit Protection: When the external short-circuit problem happens, the buzzer will alarm, and “Alarm” indicator turns on, the output will stop; it need to restart the device after the problem was solved.
110V/220V±5% at the Same Time
105~120%, 30min; 120~130%,5min;130~150%1min;>150%≤20S; Short Circuit 10ms
Pure Sine Wave
Solar Charge Controller
Max. Input Power
Max. Input Current
AC Battery Charger
AC Input Volt.
AC Charge Current
12V Max: 20A
24V Max: 10A
24V Max: 20A
48V Mad: 10A
48V Max: 15A
48V Max: 40A
96V Max: 20A
AC Input Wave Form
AC or Generator(Sine Wave)
LED + external LCD
PV Status; Battery Capacity; AC Input& Output Volt.; Load; Running Status
Operating Temp. Range
Storage Temp. Range